Summer Starts Here - Save up to 70%
Darby Extend-A-Truck Hitch Cargo Carrier Review - 2018 Chevrolet Silverado 3500- Video
Speaker 1: Today on our 2018 Chevrolet Silverado 3500, we're going to be installing Darby's Extend A Truck Hitch Mounted Load Extender, part number DTA944.This truck bed extender's going to maximize your truck's loading capacity. It's going to allow you to carry extra long items, such as ladders, lumber, tubing, and whatever else you may need.With the tailgate down on your Silverado, it's going to give you an additional 35 inches of length coming off the back of your truck.And it is a four foot wide span across, so it'll be pretty much the same width of your truck bed.You'll find tie down points on each edge at the top, so you can secure your load, make sure it ain't going anywhere.And there's five different height adjustments to match the height of your truck bed when the tailgate's up or down.It is a 350 pound load capacity, is constructed of solid steel, and has a black powder coat finish to prevent any rust and corrosion.It works with two inch by two inch hitches. Now we do have a two and a half inch hitch here on our vehicle, but if your Silverado's got one of these as well, you can get a sleeve here at etrailer.com.Now, if you have a ladder rack on your vehicle, you can put it in an upright position to extend your ladder rack as well, or if you're heading to your destination and you haven't got it loaded up yet, and you want to minimize the length of your vehicle on the way there to load it up, you can take the pin out on the backside, slide the top half off, take the pin out in the hitch, slide it out, flip it to the upright position, reinstall it, reinstall your pin, and then install the top half at the desired height.And that completes our installation of Darby's Extend A Truck Hitch Mounted Load Extender, on our 2018 Chevrolet Silverado. more
6/21/2018 4:02:49 PM
Filter Videos
Filter Videos
